Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.40到1.44 g/cm³ |
| density | | ASTMD792 | 1.40到1.44 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore A | ASTMD2240 | 95 |
| | ASTMD2240 | 89到95 |
| Shore A | ASTMD2240 | 95 |
| | ASTMD2240 | 89到95 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ASTMD2863 | 29 % |
| Limiting Oxygen Index | | ASTMD2863 | 29 % |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Yield | ASTMD412 | 19.3 MPa |
| elongation | Break | ASTMD412 | 280 % |
| tensile strength | Yield | ASTMD412 | 19.3 MPa |
| elongation | Break | ASTMD412 | 280 % |
| aging | Test Condition | Test Method | Test Result |
|---|
| Change rate of tensile strength in air | | ULUnspecified | 3.0 % |
| Change rate of ultimate elongation in air | | ULUnspecified | -15 % |
| Change rate of tensile strength in air | | ULUnspecified | 3.0 % |
| Change rate of ultimate elongation in air | | ULUnspecified | -15 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | ASTMD746 | -17.0 °C |
| brittle temperature | | ASTMD746 | -17.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare