PP EP540N BASELL THAILAND

Form：Granules | Grade：Injection grade

Properties:

High rigidityFood contact leveltransparentHigh impact resistanceAcceptable food contact

Typical Applications:

ToyHousehold appliancesHome Furnishings

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Toy \| Household appliances \| Home Furnishings
Properties:	High rigidity \| Food contact level \| transparent \| High impact resistance \| Acceptable food contact

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	0.9	g/cm³
melt mass-flow rate	230°C/2.16 kg	ISO 1133	12	g/10min
Melt Volume Flow Rate (MVR)	230°C/2.16 kg	ISO 1133	16	cm3/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	0℃	ISO 179/1eU	100
	Impact strength of simply supported beam without notch	23℃	ISO 179/1eU	105
	Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-20℃	ISO 179/1eU	75
Ball Pressure Test		ISO 2039-1	63
Tensile modulus		ISO 527	1500	Mpa
tensile strength	Yield	ISO 527	28	Mpa
Tensile strain	Yield	ISO 527	4	%
Tensile strain	Tensile strain	Break	ISO 527	50	%
Impact strength of simply supported beam without notch	23℃	ISO 179/1eA	7
	Impact strength of simply supported beam without notch	-20℃	ISO 179/1eA	4
	Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	0℃	ISO 179/1eA	4.5
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45Mpa, Unannealed	ISO 75-2/B	95	°C
Vicat softening temperature		ISO 306/A50	151	°C
Vicat softening temperature	Vicat softening temperature		ISO 306/B50	75	°C
Brittle temperature		ISO 6603-2	-52	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top