PPS FZ-8600 BK DIC JAPAN

Form：Granules

Properties:

Filler: Glass mineral

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

Filler: Glass mineral

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Friction coefficient	动态	ASTM D3702	0.35
Friction coefficient	Friction coefficient	静态	ASTM D3702	0.35
tensile strength	23°C	ASTM D638	100	Mpa
Elongation at Break	23°C	ASTM D638	1.1	%
Tensile modulus	23°C	ASTM D638	12500	Mpa
Tensile modulus	Tensile modulus	泊松比		7.58	0.33
bending strength	23°C	ASTM D790	140	Mpa
Bending modulus	23°C	ASTM D790	12000	Mpa
Impact strength of cantilever beam gap	23°C	ASTM D256	50	J/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.80MPaUnannealed	ASTM D648	260	°C
Linear coefficient of thermal expansion	MD	ASTM D696	1.8E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	ASTM D696	1.8E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	MD	ASTM D995	0.40	%
Shrinkage rate	Shrinkage rate	TD	ASTM D995	1.00	%
Water absorption rate	(23°C,24hr)	ASTM D570	0.02	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	1E+16	Ω.cm
Dielectric strength	1.60mm	ASTM D149	16	KV/mm
Dielectric constant	23°C	ASTM D150	5.0	1MHz
Dissipation factor	23°C	ASTM D150	6E-03	1MHz
	Dissipation factor	耐电弧性	ASTM D495	160	S
	Dissipation factor	Dissipation factor	相对漏电起痕指数	ASTM D3638	190	V
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness		ASTM D785	100	M（Scale）
Rockwell hardness	Rockwell hardness		ASTM D785	120	R
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL -94	V-0	0.800mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top