Phenolic Resiten® LFBI Iten Industries

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	横向Flow:1.57mm	ASTM D256	63	J/m
	Impact strength of cantilever beam gap	横向Flow:3.18mm	ASTM D256	59	J/m
		Impact strength of cantilever beam gap	横向Flow:12.7mm	ASTM D256	53	J/m
			Impact strength of cantilever beam gap	Flow:1.57mm	ASTM D256	67	J/m
				Impact strength of cantilever beam gap	Flow:3.18mm	ASTM D256	64	J/m
				Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	Flow:12.7mm	ASTM D256	95	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.6mm	UL 94	HB
	UL flame retardant rating	3.2mm	UL 94	HB
	UL flame retardant rating	UL flame retardant rating	12.7mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
compressive strength	12.7mm8	ASTM D695	>310	MPa
bending strength	3.18mm4	ASTM D790	116	MPa
	bending strength	3.18mm5	ASTM D790	114	MPa
		bending strength	12.7mm4	ASTM D790	124	MPa
		bending strength	bending strength	12.7mm5	ASTM D790	102	MPa
compressive strength	1.57mm6	ASTM D695	49.4	MPa
	compressive strength	1.57mm7	ASTM D695	59.1	MPa
		compressive strength	3.18mm6	ASTM D695	144	MPa
			compressive strength	3.18mm7	ASTM D695	130	MPa
			compressive strength	compressive strength	3.18mm8	ASTM D695	>310	MPa
bending strength	1.57mm5	ASTM D790	137	MPa
compressive strength	12.7mm6	ASTM D695	192	MPa
compressive strength	compressive strength	12.7mm7	ASTM D695	189	MPa
tensile strength	Flow:1.57mm	ASTM D638	62.9	MPa
	tensile strength	横向Flow:1.57mm	ASTM D638	62.3	MPa
		tensile strength	Flow:3.18mm	ASTM D638	75.8	MPa
		tensile strength	tensile strength	横向Flow:3.18mm	ASTM D638	64.1	MPa
bending strength	1.57mm4	ASTM D790	113	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
RTI Elec	1.6mm	UL 746	115	°C
	RTI Elec	3.2mm	UL 746	115	°C
	RTI Elec	RTI Elec	12.7mm	UL 746	115	°C
RTI	1.6mm	UL 746	125	°C
	RTI	3.2mm	UL 746	125	°C
	RTI	RTI	12.7mm	UL 746	125	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density	--2	ASTM D792	1.32	g/cm³
density	density	--3	ASTM D792	1.33	g/cm³
Water absorption rate	24hr,1.57mm	ASTM D570	1.6	%
	Water absorption rate	24hr,3.18mm	ASTM D570	1.1	%
	Water absorption rate	Water absorption rate	24hr,12.7mm	ASTM D570	0.79	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	1.57mm,1kHz	ASTM D150	6.75
	Dielectric constant	1.57mm,1MHz	ASTM D150	4.83
	Dielectric constant	Dielectric constant	3.18mm,1kHz	ASTM D150	7.54
Dielectric strength	1.27cm	ASTM D149	15000	V
Arc resistance	12.7mm	ASTM D495	45.0	sec
Dielectric strength	1.57mm	ASTM D149	41000	V
Dielectric strength	Dielectric strength	3.18mm	ASTM D149	35000	V
Arc resistance	1.57mm	ASTM D495	39.0	sec
Arc resistance	Arc resistance	3.18mm	ASTM D495	54.0	sec
Dielectric strength	1.57mm	ASTM D149	19	kV/mm
Dielectric strength	Dielectric strength	3.18mm	ASTM D149	11	kV/mm
Dielectric constant	3.18mm,1MHz	ASTM D150	5.06
Dissipation factor	1.57mm,1kHz	ASTM D150	0.15
	Dissipation factor	1.57mm,1MHz	ASTM D150	0.050
		Dissipation factor	3.18mm,1kHz	ASTM D150	0.20
		Dissipation factor	Dissipation factor	3.18mm,1MHz	ASTM D150	0.056
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
viscosity	1.27cm	ASTM D229	730000	g

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top