TPEE PELPRENE™ P90B TOYOBO CO., LTD.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D256	无断裂
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	HB
elastomer	Test Condition	Test Method	Test Result	Test Unit
Permanent compression deformation		ASTM D395	57	%
tear strength		ASTM D624	172	kN/m
tensile strength	50%Strain	ASTM D412	14.7	MPa
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Taber abraser	1000Cycles	ASTM D1044	13.0	mg
elongation	Break	ASTM D638	700	%
tensile strength	Yield	ASTM D638	31.0	MPa
Compressive modulus		ASTM D695	13.3	MPa
Bending modulus		ASTM D790	162	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD	ASTM D696	1.4E-04	cm/cm/°C
Melting temperature		DSC	203	°C
Vicat softening temperature		ASTM D1525	180	°C
Brittle temperature		ASTM D746	-65.0	°C
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	101	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium,23°C,65%RH	ASTM D570	0.40	%
Shrinkage rate	MD：2.00mm	ASTM D955	1.1	%
melt mass-flow rate	230°C/2.16kg	ASTM D1238	20	g/10min
density		ASTM D792	1.19	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength		ASTM D149	30	kV/mm
Volume resistivity		ASTM D257	6E+13	ohms·cm
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD	ASTM D2240	52

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top