PP PP CM 25.1
0
- Properties:FillerPolyPlasticRussian PolyPlastic
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.10 g/cm³ | ||
| melt mass-flow rate | 5.0到14 g/10min | ||
| Shrinkage rate | 0.80到1.1 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 17 kJ/m² | ||
| 29 kJ/m² | |||
| Charpy Notched Impact Strength | 4.2 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | Yield | 32.0 MPa | |
| Tensile strain | Break | 8.0 % | |
| Flexural modulus | 2900 MPa | ||
| Bending stress | 45.0 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | 1E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 115 °C | |||
| 75.0 °C | |||
| Melting Temperature | 162 °C | ||
| 7E-06 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top