Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D1238 | 12 g/10min |
| Melt volume flow rate | | ISO 1133 | 12.0 cm3/10min |
| Shrinkage rate | | 内部方法 | 0.50-0.70 % |
| Shrinkage rate | | 内部方法 | 0.50-0.70 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 76 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| refractive index | | ISO 489 | 1.557 |
| transmissivity | | ASTM D1003 | 88.0 % |
| Haze ratio | | ASTM D1003 | 1.1 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-2 |
| Burning wire flammability index | | IEC 60695-2-12 | 750 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTM D790 | 84.0 Mpa |
| tensile strength | | ISO 527-2/50 | 55.0 Mpa |
| tensile strength | | ASTM D638 | 56.0 Mpa |
| tensile strength | | ISO 527-2/50 | 56.0 Mpa |
| elongation | | ASTM D638 | 5.0 % |
| Tensile strain | | ISO 527-2/5 | 5.0 % |
| elongation | | ASTM D638 | 140 % |
| Tensile strain | | ISO 527-2/50 | >150 % |
| Flexural modulus | | ASTM D790 | 1960 Mpa |
| Flexural modulus | | ISO 178 | 2000 Mpa |
| bending strength | | ISO 178 | 75.0 Mpa |
| Tensile modulus | | ASTM D638 | 1880 Mpa |
| Tensile modulus | | ISO 527-2/1 | 2000 Mpa |
| tensile strength | | ASTM D638 | 55.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO 180/1A | 5.0 kJ/m² |
| Impact strength of cantilever beam gap | | ISO 180/1A | 8.0 kJ/m² |
| Dart impact | | ASTM D3763 | 95.0 J |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTM D257 | >1.0E+15 ohms |
| Volume resistivity | | ASTM D257 | >1.0E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 96.0 °C |
| Heat distortion temperature | | ASTM D648 | 90.0 °C |
| Heat distortion temperature | | ISO 75-2/Ae | 99.0 °C |
| vicat | | ASTM D15259 | 115 °C |
| vicat | | ISO 306/B120 | 115 °C |
| ball-indentation hardness | | IEC 60695-10-2 | Pass |
| Linear coefficient of thermal expansion | | ASTME831 | 1.1E-04 cm/cm/°C |
| Linear coefficient of thermal expansion | | ISO 11359-2 | 8E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | ASTME831 | 1.1E-04 cm/cm/°C |
| Linear coefficient of thermal expansion | | ISO 11359-2 | 8E-05 cm/cm/°C |
| thermal conductivity | | ISO 8302 | 0.23 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices