Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D1238 | 3.0 g/10 min |
| Shrinkage rate - flow | | 内部方法 | 1.4 到 1.8 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 80 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 25.0 Mpa |
| elongation | | ASTM D638 | > 200 % |
| Flexural modulus | | ASTM D790A | 1080 Mpa |
| injection | Test Condition | Test Method | Test Result |
|---|
| Processing (melt) temperature | | | 180 到 230 °C |
| Temperature | | | 30 到 50 °C |
| Injection Pressure | | | 2.94 到 5.88 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Thermal deformation temperature under load | | ASTM D648 | 110 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices