Unspecified Borealis PP MS65T40
0
- Properties:Fillermineral filler40%filler by weight
- Usages:Underhood parts of automobilesinternal parts of automobilesand applications in the automotive industry
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.24 g/cm³ | |
| melt mass-flow rate | ISO1133 | 12 g/10min | |
| Shrinkage rate | 内部方法 | 0.90 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO2039-1 | 82.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO179/1eU | 20 kJ/m² | |
| Impact strength of cantilever beam gap | ISO180/1A | 2.5 kJ/m² | |
| ISO180/1U | 9.0 kJ/m² | ||
| ISO180/1U | 14 kJ/m² | ||
| Charpy Notched Impact Strength | ISO179/1eA | 2.5 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO179/1eU | 10 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | Injection | ISO527-2/1 | 3500 MPa |
| Tensile stress | ISO527-2/50 | 30.0 MPa | |
| Tensile strain | ISO527-2/50 | 3.2 % | |
| Flexural modulus | Injection | ISO178 | 3700 MPa |
| Bending stress | Injection | ISO178 | 46.0 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/B | 120 °C | ||
| ISO75-2/A | 72.0 °C | ||
| vicat | ISO306/A | 152 °C | |
| ISO306/B | 96.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top