PA66 LUBEMID A26 GK50 NATURAL
0
- Properties:Fillerglass beads50%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.53to1.57 g/cm³ |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/1A | 3.50-4.50 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180/1U | 35-45 kJ/m² | |
| tensile strength | ISO 527-2 | 55-65 MPa | |
| elongation at break | ISO 527-2 | 4.00-5.00 % | |
| Tensile modulus | ISO 527-2 | 4000-4500 MPa | |
| bending strength | ISO 178 | 105-115 MPa | |
| Flexural modulus | ISO 178 | 3000-4000 MPa | |
| Charpy Notched Impact Strength | ISO 179/1eA | 3.50-4.50 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 35-45 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/Bf | 230-240 °C | |
| vicat | Melting Temperature | ISO 11357-3 | 250-265 °C |
| Linear coefficient of thermal expansion | ISO 306/A120 | 240-250 °C | |
| ISO 306/B120 | 230-240 °C | ||
| ASTM D648 | 235-245 °C | ||
| ASTM D648 | 70-80 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top