PMMA MD001 MITUBISHI RAYON JAPAN

Form：Granules | Grade：Heat resistant grade

Properties:

Flame retardantHigh temperature resistanUV resistance

Typical Applications:

Automotive componentsCasters

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive components \| Casters
Properties:	Flame retardant \| High temperature resistan \| UV resistance

Certificates

No Data...

Technical Data Sheet

machinability	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ASTM D-955	0.2-0.5	%
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	230℃，37.3n	ASTM D-1238	6.0	g/10min
Water absorption rate	24hr	ASTM D-570	0.3	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
elongation		ASTM D-638	7	%
Rockwell hardness		ASTM D-785	92	M Scale
Bending modulus	1/4"棒	ASTM D-790	3.0[3.1×10	GPa[KG/cm
bending strength	1/4"棒	ASTM D-790	103[1050]	MPa[KG/cm
Impact strength of cantilever beam gap	1/4槽口副	ASTM D-256	16[1.6]	J/m[kg.cm/cm]
tensile strength		ASTM D-638	69[700]	MPa[KG/cm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature	9.8N	ASTM D-1525	104	°C
Linear coefficient of thermal expansion		ASTM D-696	6×10	1/℃
Spiral flow length	230℃	MRC	190-290	mm
Linear coefficient of thermal expansion		ASTM D-177	0.2	W/m℃
Hot deformation temperature	1.82MPa	ASTM D-648	89	°C
specific heat		JIS K-7123	1.5[0.35]	J/g.c[(cal/g/℃)]
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Transmittance rate	2mm	ASTM D-1003	93	%
Refractive index		ASTM D-542	1.49
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	60Hz		3.7
Dielectric loss	60Hz，Tangent		0.05
Dielectric strength			20[20]	MV/m[KV/mm]
Arc resistance		JIS K-6911	没有痕迹
Volume resistivity		JIS K-6911	＞10
Volume resistivity	Volume resistivity		JIS K-6911	＞10	m[cm]

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top