HDPE 5600B PRIME POLYMER JAPAN

Form：Granules | Grade：Injection grade

Properties:

High impact resistancehigh density

Typical Applications:

chipCosmeticcontainer

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	chip \| Cosmetic \| container
Properties:	High impact resistance \| high density

Certificates

No Data...

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
characteristic			冲击强度
purpose			洗涤剂容器、洗发水容器、化妆品容器
impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch		ISO 179	无断裂
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ISO 1133	0.45	g/10min
density		ISO 1183	935	kg/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Break	ISO 527-2	>500	%
Bending modulus		ISO 178	550	Mpa
Tensile modulus		ISO 527-2	550	Mpa
tensile strength	Yield	ISO 527-2	17.0	Mpa
Tensile stress	Yield	ISO 527-2	17	Mpa
elongation	Break	ISO 527-2	＞500	%
Tensile modulus		ISO 527-1	550	Mpa
Bending modulus		ISO 178	550	Mpa
Dart impact		ISO 179-1	NB	KJ/m
Shore hardness		ISO 868	58
Environmental stress cracking resistance		ASTM D-1693	＞600	hours
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ISO 306	119	°C
Melting temperature		ISO 11357-3	126	°C
Vicat softening temperature		ISO 306	119	°C
Melting temperature		ISO 11357-3	126	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190°C/2.16kg	ISO 1133	0.45	g/10min
Environmental stress cracking resistance		ASTM D1693	>600	hr
density		ASTM D792/ISO 1183	0.935
melt mass-flow rate		ASTM D1238/ISO 1133	0.45	g/10min
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD	ISO 868	58

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top