Technical Data Sheet
| Uncured Properties | Test Condition | Test Method | Test Result |
|---|
| Curing Time | | | 16 hr |
| physical property | Test Condition | Test Method | Test Result |
|---|
| Solid content by volume | | | 100 % |
| density | | | 2.50 g/cm³ |
| Specific volume | | | 0.448 cm³/g |
| Shrinkage rate | | ASTM D2566 | 0.10 % |
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| Thermosetting components | | | 按容量计算的混合比:3.8按重量计算的混合比:11 |
| Thermosetting components | | | 按容量计算的混合比:1.0按重量计算的混合比:1.0 |
| Thermosetting components | | | 58 min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 85 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Tensile shear adhesion | | ASTM D1002 | 16.4 MPa |
| Temperature resistance | | | 121 °C |
| Temperature resistance | | | 49 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 5520 MPa |
| bending strength | | ASTM D790 | 36.4 MPa |
| compressive strength | | ASTM D695 | 57.9 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTM D149 | 1.2 kV/mm |
| dielectric constant | | ASTM D150 | 75.0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Linear coefficient of thermal expansion | | ASTM D696 | 6.1E-05 cm/cm/°C |
| thermal conductivity | | ASTMC177 | 0.51 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare