Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
density | | ISO 1183 | 0.900 g/cm³ |
melt mass-flow rate | | ISO 1133 | 7.0 g/10min |
hardness | Test Condition | Test Method | Test Result |
---|
Rockwell hardness | R-Scale | ISO 2039-2 | 77 |
optical performance | Test Condition | Test Method | Test Result |
---|
Haze ratio | | ASTM D1003 | <2.0 % |
Supplementary Information | Test Condition | Test Method | Test Result |
---|
HeatSealTemperature | | 内部方法 | 125 °C |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
Tensile strain | Break | ISO 527-2 | >500 % |
Flexural modulus | | ISO 178 | 735 MPa |
coefficient of friction | | 内部方法 | <1.0 |
tensile strength | Yield | ISO 527-2 | 22.6 MPa |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Impact strength of cantilever beam gap | | ISO 180 | 69 J/m |
Thermal performance | Test Condition | Test Method | Test Result |
---|
Heat distortion temperature | | ISO 75-2/B | 80.0 °C |
melting temperature | | 内部方法 | 135 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.