Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.27to1.31 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 65to71 |
| | ASTMD2240 | 50to56 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ASTMD2863 | 29 % |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD412 | 29.0 MPa |
| tensile strength | | ASTMD412 | 22.8 MPa |
| elongation | | ASTMD412 | 250 % |
| elongation | | ASTMD412 | 230 % |
| aging | Test Condition | Test Method | Test Result |
|---|
| The rate of change in tensile strength in air | | ULUnspecified | 4.0 % |
| Change rate of ultimate elongation in air | | ULUnspecified | -9.0 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 1E+14 ohms·cm |
| DielectricConstant | | ASTMD150 | 2.70 |
| Dissipation Factor | | ASTMD150 | 0.015 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | ASTMD746 | -18.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare