ABS KRALASTIC® UT-61 NIPPON A&L
6
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Mold shrinkage rate | ASTM D-955 | 0.4-0.8 % |
| processability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| mold temperature | 200-260 °C |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 33 g/10min | |
| density | ASTM D-792 | 1.05 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D-638 | 48 Mpa | |
| elongation at break | ASTM D-638 | 26 % | |
| Flexural modulus | ASTM D-790 | 2210 Mpa | |
| bending strength | ASTM D-790 | 68 Mpa | |
| IZOD notch impact strength | ASTM D-256 | 137 J/m | |
| ASTM D-256 | 59 J/m | ||
| Rockwell hardness | ASTM D-785 | 116 R-Scale |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL94 | HB calss | |
| ASTM D-648 | 89 °C | ||
| vicat | ASTM D-1525 | 106 °C | |
| Ball indentation temperature | 95 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top