Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.03 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | 14 g/10min |
| Shrinkage rate | | ASTM D955 | 0.30to0.60 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 74 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| transmissivity | | ASTM D1003 | 90.0 % |
| Haze ratio | | ASTM D1003 | 1.0 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| DishwasherTest | | | 3E+02 Cycles |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | Yield | ASTM D790 | 37.9 MPa |
| tensile strength | Break | ASTM D638 | 34.5 MPa |
| elongation | Break | ASTM D638 | 45 % |
| Flexural modulus | | ASTM D790 | 1860 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Dart impact | | ASTM D3763 | >3.39 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 82.2 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare