Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTM D-955 | 0.35 % |
| other | Test Condition | Test Method | Test Result |
|---|
| purpose | | | 电器用具.连接器.汽车领域的应用 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ASTM D-570 | 0.050 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D-638 | 115 Mpa |
| elongation at yield | | ASTM D-638 | 2.5 % |
| Flexural modulus | | ASTM D-790 | 7500 Mpa |
| bending strength | | ASTM D-790 | 185 Mpa |
| Rockwell hardness | | ASTM D-785 | 70 M-scale |
| elongation | | ASTM D638/ISO 527 | 2.5 % |
| Rockwell hardness | | ASTM D785 | 70 |
| bending strength | | ASTM D790/ISO 178 | 26800 psi kg/cm²(MPa)[Lb/in²] |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D-257 | 1E+16 ohm.cm |
| dielectric strength | | ASTM D-149 | 48.0 KV/mm |
| dielectric constant | | ASTM D-150 | 2.900 |
| Dielectric loss | | ASTM D-150 | 0.0010 |
| Volume resistivity | | ASTM D257/IEC 60093 | 1.0E+16 Ω.cm |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.25 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D-648 | 268 °C |
| Heat distortion temperature | | ASTM D-648 | 245 °C |
| Linear coefficient of thermal expansion | | ASTM D-696 | 0.000025 cm/cm/℃ |
| UL flame retardant rating | | UL 94 | HB |
| Combustibility (rate) | | UL 94 | HB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices