
POM GB-25 BK JAPAN POLYPLASTIC
141
Form:Granules | Grade:Fill level
Properties:
Glass bead reinforcementLow warpageFiller: Glass beads25%Filler by weight25%Filler by weight
Typical Applications:
Bottle capElectronic and electrical components
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Bottle cap | Electronic and electrical components |
| Properties: | Glass bead reinforcement | Low warpage | Filler: Glass beads | 25% | Filler by weight | 25% | Filler by weight |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 3.4 | kJ/m² |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL 94 | HB | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | ISO 178 | 3800 | Mpa | |
| Tensile strain | Break | ISO 527-2 | 10 | % |
| tensile strength | ISO 527-2 | 59.0 | Mpa | |
| Tensile modulus | ISO 527-2 | 4000 | Mpa | |
| Wear factor | 0.060MPa,0.15m/sec7 | JISK7218 | 8000 | 10^-8mm³/N·m |
| 0.49MPa,0.30m/sec6 | JISK7218 | 7000 | 10^-8mm³/N·m | |
| 0.49MPa,0.30m/sec5 | JISK7218 | 500 | 10^-8mm³/N·m | |
| 0.060MPa,0.15m/sec4 | JISK7218 | 40 | 10^-8mm³/N·m | |
| Friction coefficient | Steel - Dynamic3 | JISK7218 | 0.51 | |
| Dynamic2 | JISK7218 | 0.37 | ||
| bending strength | ISO 178 | 104 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | TD:23to55°C | Internal Method | 9E-05 | cm/cm/°C |
| MD:23to55°C | Internal Method | 9E-05 | cm/cm/°C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 110 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD:2.00mm | ISO 294-4 | 1.7 | % |
| TD:2.00mm | ISO 294-4 | 1.4 | % | |
| Melt Volume Flow Rate (MVR) | 190°C/2.16kg | ISO 1133 | 5.00 | cm3/10min |
| melt mass-flow rate | 190°C/2.16kg | ISO 1133 | 7.0 | g/10min |
| density | ISO 1183 | 1.59 | g/cm³ | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | 3.00mm | IEC 60243-1 | 21 | KV/mm |
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| ColourNumber | CF3500/CD3501 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.