PBT SK645FR NC010 DUPONT USA

135

Form：Granules | Grade：Injection grade

Properties:

Flame retardantGlass fiber reinforcedFiller: Glass fiber reinf20%Filler by weight

Typical Applications:

Electronic and electrical componentsAutomotive Applications

Supplier(2)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Electronic and electrical components \| Automotive Applications
Properties:	Flame retardant \| Glass fiber reinforced \| Filler: Glass fiber reinf \| 20% \| Filler by weight

Certificates

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
characteristic			阻燃
impact performance	Test Condition	Test Method	Test Result	Test Unit
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	40	kJ/m²
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	40	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	53	kJ/m²
	Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	57	kJ/m²
	Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	50	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.75mm	UL 94	V-0
	UL flame retardant rating	1.5mm	UL 94	V-0
		UL flame retardant rating	0.75mm	IEC 60695-11-10,-20	V-0
		UL flame retardant rating	UL flame retardant rating	1.5mm	IEC 60695-11-10,-20	V-0
Extreme Oxygen Index		ISO 4589-2	31	%
FMVSS flammability		FMVSS302	DNI
UL flame retardant rating	0.75mm	IEC 60695-11-10,-20	V-0
	UL flame retardant rating	1.5mm	IEC 60695-11-10,-20	V-0
		UL flame retardant rating	0.75mm	UL 94	V-0
		UL flame retardant rating	UL flame retardant rating	1.5mm	UL 94	V-0
Extreme Oxygen Index		ISO 4589-2	32	%
FMVSS flammability		FMVSS302	DNI
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Break	ISO 527-2	2.4	%
Tensile creep modulus	1hr	ISO 899-1	11000	Mpa
tensile strength	Break	ISO 527-2	125	Mpa
Tensile modulus		ISO 527-2	11200	Mpa
bending strength		ISO 178	215	Mpa
Tensile creep modulus	1000hr	ISO 899-1	8000	Mpa
Tensile modulus		ASTM D638/ISO 527	11200	kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	215	kg/cm²(MPa)[Lb/in²]
Tensile modulus		ISO 527-2	8300	Mpa
tensile strength	Break	ISO 527-2	110	Mpa
Tensile strain	Break	ISO 527-2	2.8	%
bending strength		ISO 178	165	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	TD	ISO 11359-2	9E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD	ISO 11359-2	3E-05	cm/cm/°C
Melting temperature		ISO 11357-3	225	°C
Vicat softening temperature		ISO 306/B50	212	°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	210	°C
	Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	220	°C
	Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	200	°C
Combustibility (rate)		UL 94	V-0
Physical properties	Test Condition	Test Method	Test Result	Test Unit
MediumDensity			1.49	g/cm³
Top out temperature			170	°C
Water absorption rate	Equilibrium,23°C,2.00mm,50%RH	ISO 62	0.10	%
Water absorption rate	Water absorption rate	Saturation,23°C,2.00mm	ISO 62	0.30	%
Shrinkage rate	MD2	ISO 294-4	0.50	%
	Shrinkage rate	MD	ISO 294-4	0.30	%
		Shrinkage rate	TD	ISO 294-4	1.2	%
		Shrinkage rate	Shrinkage rate	TD2	ISO 294-4	1.5	%
SpecificHeatCapacity of Melt			1600	J/kg/°C
ThermalConductivityofMelt			0.26	W/m/K
density		ASTM D792/ISO 1183	1.71
Shrinkage rate	MD	ISO 294-4	0.50	%
Shrinkage rate	Shrinkage rate	MD2	ISO 294-4	0.60	%
Water absorption rate	Saturation,23°C,2.00mm	ISO 62	0.32	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,2.00mm,50%RH	ISO 62	0.13	%
Top out temperature			170	°C
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Relative permittivity	100Hz	IEC 60250	4.50
Dielectric strength		IEC 60243-1	39	KV/mm
Volume resistivity		IEC 60093	>1.0E+15	ohms·cm
Surface resistivity		IEC 60093	1E+15	ohms
Relative permittivity	1MHz	IEC 60250	3.80
Dissipation factor	100Hz	IEC 60250	3E-03
Dissipation factor	Dissipation factor	1MHz	IEC 60250	0.016
Compared to the anti leakage trace index		IEC 60112	PLC 2
Compared to the anti leakage trace index	Compared to the anti leakage trace index		IEC 60112	PLC 3

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Supplier Join

Get App

Top

PBT SK645FR NC010 DUPONT USA

Product Description

Certificates

Technical Data Sheet

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index