Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.02 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 0.80 g/10min |
| The degree of cross combination | | ASTMD2765 | 67 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ASTMD2863 | 24 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| AcidGasEmission-HBr | | CSAC22.2No.0.3Method2 | 3.7 % |
| CrushingTest | | UL1581 | 612350 g |
| HotElongation | | 内部方法 | 40 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | UL1581 | 13.6 MPa |
| tensile strength | Yield | UL1581 | 12.4 MPa |
| tensile strength | Break | UL1581 | 16.2 MPa |
| tensile strength | | UL1581 | 15.9 MPa |
| tensile strength | | UL1581 | 12.6 MPa |
| elongation | Break | UL1581 | 430 % |
| elongation | | UL1581 | 380 % |
| elongation | | UL1581 | 330 % |
| aging | Test Condition | Test Method | Test Result |
|---|
| WeatherometerAging | | UL1581 | 15.2 MPa |
| WeatherometerAging | | UL1581 | 400 % |
| WeatherometerAging | | UL1581 | 380 % |
| WeatherometerAging | | UL1581 | 430 % |
| WeatherometerAging | | UL1581 | 17.2 MPa |
| WeatherometerAging | | UL1581 | 17.1 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| insulation resistance | | UL1581 | 220000 Mohms/1000ft |
| insulation resistance | | UL1581 | 2000 Mohms/1000ft |
| insulation resistance | | UL1581 | 2600 Mohms/1000ft |
| dielectric constant | | ASTMD150 | 2.34 |
| dielectric constant | | ASTMD150 | 2.34 |
| dielectric constant | | UL1581 | 2.50 |
| Dissipation Factor | | ASTMD150 | 1.2E-03 |
| Dissipation Factor | | ASTMD150 | 8E-04 |
| DielectricBreakdown | | UL1581 | 32000 V |
| DielectricBreakdown | | UL1581 | 26000 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | ASTMD746 | <-75.0 °C |
| deformation | | UL1581 | 1.0 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare