Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.18 g/cm³ |
| Water absorption rate | | ASTMD570 | 0.18 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 101 |
| Barcol Hardness | | ASTMD2583 | 54 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| UV Transmittance | | | 63 % |
| UV Transmittance | | | 82 % |
| refractive index | | ASTMD542 | 1.490 |
| transmissivity | | ASTMD1003 | 92.6 % |
| Haze ratio | | ASTMD1003 | 1.5 % |
| Yellowness Index | | ASTMD1925 | 0.70 YI |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| HotFormingTemperature | | 内部方法 | 171到193 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256A | 22 J/m |
| CharpyUnnotched | | ASTMD6110 | 315 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTMD790 | 3170 MPa |
| bending strength | | ASTMD790 | 120 MPa |
| Tensile modulus | | ASTMD638 | 3250 MPa |
| tensile strength | | ASTMD638 | 64.6 MPa |
| elongation | | ASTMD638 | 3.3 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 95.6 °C |
| | ASTMD696 | 6.5E-05 cm/cm/°C |
| specific heat | | ASTMC351 | 1460 J/kg/°C |
| thermal conductivity | | 内部方法 | 0.20 W/m/K |
| thermal stability | | ASTMD4802 | Nodegradation |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare