PA9T Genestar™ G1300A
603
- Properties:heat-resistingAntichemical
- Usages:Automotive sector
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| notes | 连接器 | ||
| characteristic | 耐高温270度 | ||
| Color | 本色 | ||
| purpose | 连接器 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ASTM D256/ISO 179 | 110 kg·cm/cm(J/M)ft·lb/in | |
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 110 kg·cm/cm(J/M)ft·lb/in | |
| elongation at break | ASTM D638/ISO 527 | 4.0% % | |
| tensile strength | ASTM D638/ISO 527 | 712 kg/cm²(MPa)[Lb/in²] | |
| Rockwell hardness | ASTM D785 | 30 | |
| Flexural modulus | ASTM D790/ISO 178 | 112 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 205 kg/cm²(MPa)[Lb/in²] |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric constant | ASTM D150/IEC 60250 | 30 |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.37 | |
| Shrinkage rate | ASTM D955 | 0.2 % | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 45 g/10min |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Combustibility (rate) | UL 94 | HB | |
| Heat distortion temperature | ASTM D648/ISO 75 | 270 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top