ABS

ABS Tisakril® ABS 30 GFR Tisan

Properties:
Filler glass fiber reinforced material 30% filler by weight
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	23°C	ISO 180/A	6.0 kJ/m²

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Break	ISO 527-2	70.0 MPa
Tensile strain	Yield	ISO 527-2	4.5 %
Tensile strain	Tensile strain	Break	ISO 527-2	4.3 %
tensile strength	Yield	ISO 527-2	75.0 MPa

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/Be	105 °C
Vicat softening temperature		ISO 306/B120	115 °C
Melting temperature			16.0 °C

Physical properties	Test Condition	Test Method	Test Result
density		ISO 1183	1.24 g/cm³
Shrinkage rate			<1.0 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	<0.050 %
ash content		ISO 3451	30 %

Electrical performance	Test Condition	Test Method	Test Result
Compared to the anti leakage trace index	3.00mm	IEC 60112	PLC 1

hardness	Test Condition	Test Method	Test Result
Shore hardness	ShoreD	ISO 868	68

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top