GPPS 666H TRINSEO HK

Form：Granules | Grade：Injection grade

Properties:

TougheningHigh glossProperty: High glossinessHigh toughness

Typical Applications:

chipShellToyHousehold appliancesLighting fixturesElectronic fieldElectrical field

Supplier(1)

Product Description

Certificates(0)

Datasheet

Alternative Model(23)

Product Description

Typical Applications:	chip \| Shell \| Toy \| Household appliances \| Lighting fixtures \| Electronic field \| Electrical field
Properties:	Toughening \| High gloss \| Property: High glossiness \| High toughness

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D-1238	8	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23℃	ASTM D-256	21	J/m
Tensile modulus		ASTM D-638	3300	Mpa
tensile strength	Yield	ASTM D-638	42	Mpa
tensile strength	tensile strength	Break	ASTM D-638	42	Mpa
elongation	Break	ASTM D-638	2	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.47mm	UL 94	HB
Hot deformation temperature	1.8MPa	ASTM D-648	92	°C
Vicat softening temperature		ASTM D-1525	99	℉
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D-792	1.04

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top