Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.18 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 74 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| refractive index | | ASTMD542 | 1.490 |
| transmissivity | | ASTMD1003 | >90.0 % |
| transmissivity | | ASTMD1003 | >88.0 % |
| Haze ratio | | ASTMD1003 | <10 % |
| Haze ratio | | ASTMD1003 | <12 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 42.1 MPa |
| elongation | | ASTMD638 | 2.7 % |
| bending strength | | ASTMD790 | 75.8到89.6 MPa |
| Tensile modulus | | ASTMD638 | 2340 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTMD256 | 69 J/m |
| Falling hammer impact | | ASTMD3029 | 3.39 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTMD648 | 91.1 °C |
| Continuous use temperature | | ASTMD794 | 80.0 °C |
| melting temperature | | | 140到180 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare