Technical Data Sheet
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| Thermosetting components | | | 100 |
| Thermosetting components | | | 100 |
| Thermosetting components | Demold Time | | 0.25to0.50 min |
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D1622 | 1.04 g/cm³ |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| HeatSag | | ASTM D3769 | 7.62 mm |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 480 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Break | ASTM D638 | 27.6 MPa |
| elongation | Break | ASTM D638 | 250 % |
| Flexural modulus | | ASTM D790 | 372 MPa |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Break | ASTM D412 | 27.6 MPa |
| elongation | Break | ASTM D412 | 250 % |
| tear strength | | ASTM D624 | 96.3 kN/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare