PC L-1250Y JIAXING TEIJIN

652

Form：Granules | Grade：Injection grade

Properties:

transparentMedium viscosityHigh mobility

Typical Applications:

Industrial componentsHousehold appliancesMechanical componentsCastersLabor protection equipmentNursing supplies

Supplier(1)

Product Description

Certificates(1)

Datasheet

Alternative(26)

Product Description

Typical Applications:	Industrial components \| Household appliances \| Mechanical components \| Casters \| Labor protection equipment \| Nursing supplies
Properties:	transparent \| Medium viscosity \| High mobility

Certificates

SGS

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
Transmittance rate		ASTM D1003/ISO 13468	88	%
Refractive index		ASTM D542/ISO 489	1.585
other	Test Condition	Test Method	Test Result	Test Unit
characteristic			吹塑成型 .对流动性要求较高的薄壁制品、电器、电子元件、机械零件、劳保、医疗用品、照明器具及灯罩、餐具、容器。
machinability	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	Flow(Across Flow)	ASTM D-955	0.5-0.7	%
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	24hr，in 23℃	ASTM D-570	0.20	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Elongation at Break	Yield点，-	ASTM D-638	6	-
Rockwell hardness		ASTM D-785	77	M标度
Impact strength of cantilever beam gap	艾氏、带Notched厚度3.2mm	ASTM D-256	880(90)	j/m(kgf.cm/cm)
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	艾氏、带Notched厚度6.4mm	ASTM D-256	140(14)	j/m(kgf.cm/cm)
compressive strength		ASTM D-695	76(770)	MPa(Kgf/cm
bending strength		ASTM D-790	90(915)	MPa(Kgf/cm
Tensile modulus		ASTM D-638	2120(21600)	MPa(Kgf/cm
tensile strength	Break点，-	ASTM D-638	81(830)	MPa(Kgf/cm
tensile strength	tensile strength	Yield点，-	ASTM D-638	61(620)	MPa(Kgf/cm
Elongation at Break	Break点，-	ASTM D-638	140	-
Bending modulus		ASTM D-790	2230(22700)	MPa(Kgf/cm
Charpy Notched Impact Strength		ASTM D256/ISO 179	140(14)	kg·cm/cm(J/M)ft·lb/in
Tensile modulus		ASTM D638/ISO 527	2120(21600)	kg/cm²(MPa)[Lb/in²]
tensile strength		ASTM D638/ISO 527	61(620)屈服 81(830)断裂	kg/cm²(MPa)[Lb/in²]
elongation		ASTM D638/ISO 527	6	%
Rockwell hardness		ASTM D785	M-77
Bending modulus		ASTM D790/ISO 178	2230(22700)	kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	90(915)	kg/cm²(MPa)[Lb/in²]
Elongation at Break		ASTM D638/ISO 527	140	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	负荷1.813MPa(18.6kgf/cm)	ASTM D-648	143	°C
Temperature index	非冲击式，厚度1.47mm	UL 746B	125	°C
	Temperature index	冲击式，厚度1.47mm	UL 746B	115	°C
	Temperature index	Temperature index	电学式，厚度1.47mm	UL 746B	125	°C
Hot deformation temperature	负荷0.451MPa(4.6kgf/cm)	ASTM D-648	143	°C
Linear coefficient of thermal expansion	Flow(Across Flow)	ASTM D-696	7
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion		ASTM D696/ISO 11359	7X10^-5	mm/mm.℃
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Refractive index		ASTM D-542	1.585
Transmittance rate	厚度3mm	ASTM D-1003	88	%
density		ASTM D792/ISO 1183	1.2
Water absorption rate		ASTM D570/ISO 62	0.2	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	60Hz(10	ASTM D-150	2.95(2.9)
Dielectric strength	快速加压值厚度1.6mm	ASTM D-149	30	KV/mm
Volume resistivity		ASTM D-257	3
Dielectric loss	60Hz(10，Tangent	ASTM D-150	0.0004(0.009)
Arc resistance		ASTM D-495	110	secc
Compared to the anti leakage trace index	CTI	IEC 112	PLC 2
Arc resistance		ASTM D495/IEC 60112	110
Volume resistivity		ASTM D257/IEC 60093	3	Ω.cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top