PP INSTRUC PPGF10GB15CC

Properties:
Filler
glass fiber reinforced material
10%
filler by weight
glass beads
15%
filler by weight
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTMD792	1.07 g/cm³
density	density		ASTMD792	1.07 g/cm³
Shrinkage rate		ASTMD955	0.30to0.70 %
Shrinkage rate	Shrinkage rate		ASTMD955	0.30to0.70 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTMD256	320to530 J/m
	Impact strength of cantilever beam gap		ASTMD256	32 J/m
		Impact strength of cantilever beam gap		ASTMD256	320to530 J/m
		Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTMD256	32 J/m

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Break	ASTMD638	31.0 MPa
elongation	Break	ASTMD638	5.0to10 %
Flexural modulus		ASTMD790	2410 MPa
tensile strength	Break	ASTMD638	31.0 MPa
elongation	Break	ASTMD638	5.0to10 %
Flexural modulus		ASTMD790	2410 MPa

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ASTMD257	1E+17 ohms
Surface Resistivity	Surface Resistivity		ASTMD257	1E+17 ohms

Thermal performance	Test Condition	Test Method	Test Result
		ASTMD648	113 °C
			ASTMD648	113 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top