
PP PPH-XD-045 Dalian Petrochemical
Properties:
Performance excellent insulation chemical stability and good stress cracking resistance
Typical Applications:
Used for processing plastic products such as woven bags flat silk packaging bags injection products etc
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Used for processing plastic products such as woven bags | flat silk | packaging bags | injection products | etc |
| Properties: | Performance | excellent insulation | chemical stability | and good stress cracking resistance |
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Chlorine content | Q/SH C001 | 合格|≤100 | mg/kg | |
| Q/SH C001 | 二级|≤100 | mg/kg | ||
| Q/SH C001 | 一级|≤100 | mg/kg | ||
| ash content | GB/T 9345 | 合格|≤350 | mg/kg | |
| GB/T 9345 | 二级|≤250 | mg/kg | ||
| GB/T 9345 | 一级|≤150 | mg/kg | ||
| Equal standard index | GB/T 2412 | 一级|≥96.0 | % | |
| Volatile compounds | Q/SH C001 | 合格|≤0.20 | % | |
| Q/SH C001 | 二级|≤0.20 | % | ||
| Q/SH C001 | 一级|≤0.20 | % | ||
| Equal standard index | GB/T 2412 | 合格|≥94.0 | % | |
| GB/T 2412 | 二级|≥96.0 | % | ||
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | GB/T 3682 | 二级|2.0-6.0 | g/10min | |
| GB/T 3682 | 一级|2.0-6.0 | g/10min | ||
| Apparent density | GB/T 1636 | 合格|≥0.38 | g/cm3 | |
| GB/T 1636 | 二级|≥0.41 | g/cm3 | ||
| GB/T 1636 | 一级|≥0.43 | g/cm3 | ||
| melt mass-flow rate | GB/T 3682 | 合格|2.0-6.0 | g/10min | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | Yield | GB/T 1040 | 合格|≥31.5 | MPa |
| Yield | GB/T 1040 | 二级|≥31.5 | MPa | |
| Yield | GB/T 1040 | 一级|≥31.5 | MPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.