
PA12 3030U UBE JAPAN
177
Form:Granules | Grade:Injection grade
Properties:
high viscosityDimensional stabilityThermal stabilityEasy to process
Product Description
Certificates(1)
Datasheet
Product Description
| Properties: | high viscosity | Dimensional stability | Thermal stability | Easy to process |
Certificates

Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| bending strength | ISO 178 | 59.0 | Mpa | |
| Bending modulus | ISO 178 | 1400 | Mpa | |
| Tensile strain | Break | ISO 527-2 | 200 | % |
| Yield | ISO 527-2 | 4.0 | % | |
| tensile strength | Yield | ISO 527-2 | 46.0 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 1.3E-04 | cm/cm/°C |
| Melting temperature | ISO 3146 | 178 | °C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 48.0 | °C |
| 0.45MPa,Unannealed | ISO 75-2/B | 90.0 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.70 | % |
| Shrinkage rate | MD | ISO 294-4 | 0.60 | % |
| TD | ISO 294-4 | 1.5 | % | |
| melt mass-flow rate | 235°C/2.16kg | ISO 1133 | 3.0 | g/10min |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | IEC 60093 | 1E+15 | ohms·cm | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ShoreD | ISO 868 | 78 | |
| Rockwell hardness | R-Sale | ISO 2039-2 | 105 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.