PP NAX9
0
- Properties:Colorless cylindrical particlesgood hand softnesshigh impact copolymer products with high ethylene content and high rubber content
- Usages:Suitable for casting and blow molding processingcan partially replace ethylene propylene rubber
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | GB/T 3682 | 0.5 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile yield strength | ISO 527-1 | 18 MPa | |
| Flexural modulus | ISO 178 | 300 MPa | |
| Impact strength of cantilever beam gap | ISO 179 | NB Kj/m2 | |
| ISO 179 | NB Kj/m2 |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| yellow index | ASTM D-6290 | ≤2 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| DTUL | ISO 75 | 60 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top