PA66

PA66 Polimid A 30 GF Poliblend S.p.a.

Properties:
Filler glass fiber reinforced material 30% filler by weight
Usages:
Seals automotive applications cable sheaths
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ISO 180/A	9.5 kJ/m²
Suspended wall beam without notch impact strength		ISO 180	70 kJ/m²

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	3.2mm	UL 94	HB
Burning wire flammability index	2.0mm	IEC 60695-2-12	650 °C
UL flame retardant rating	0.8mm	UL 94	HB
UL flame retardant rating	UL flame retardant rating	1.6mm	UL 94	HB

mechanical properties	Test Condition	Test Method	Test Result
Tensile strain	Break	ISO 527-2	2.5 %
Tensile modulus		ISO 527-2	9000 MPa
tensile strength	Yield	ISO 527-2	160 MPa
tensile strength	tensile strength	Break	ISO 527-2	160 MPa
Tensile strain	Yield	ISO 527-2	2.5 %

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	255 °C
	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	240 °C
	Hot deformation temperature	Hot deformation temperature	连续使用温度3		110 °C
Vicat softening temperature		ISO 306/A120	255 °C
Ball Pressure Test	165°C	IEC 60695-10-2	通过
Melting temperature		DSC	260 °C

Physical properties	Test Condition	Test Method	Test Result
density		ISO 1183	1.36 g/cm³
Shrinkage rate			0.40to0.80 %
Water absorption rate	23°C,24hr	ISO 62	0.70 %

Electrical performance	Test Condition	Test Method	Test Result
Compared to the anti leakage trace index		IEC 60112	PLC 1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top