Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D3763 | 1.40 g/cm³ |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 7700 MPa |
| tensile strength | Break | ASTM D638 | 71.7 MPa |
| elongation | Break | ASTM D638 | 0.50 % |
| Flexural modulus | | ASTM D790 | 8000 MPa |
| bending strength | | ASTM D790 | 100 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D412 | 64 J/m |
| Suspended wall beam without notch impact strength | | ASTM D412 | 190 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | | 0.25 ohms |
| Volume resistivity | | | 0.030 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| thermal conductivity | | ASTM D5470 | 0.70 W/m/K |
| RTI Elec | | UL 746 | 70.0 °C |
| RTI Imp | | UL 746 | 70.0 °C |
| RTI | | UL 746 | 70.0 °C |
| Heat distortion temperature | | ASTM D648 | 99.0 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 1.8E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare