Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
density | | ASTMD792A | 1.85 g/cm³ |
Water absorption rate | | ASTM D570 | 0.15 % |
Water absorption rate | | ISO 62 | 0.15 % |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
tensile strength | Yield | ASTM D638 | 52.2 MPa |
tensile strength | Yield | ISO 527-2 | 52.0 MPa |
Flexural modulus | | ASTM D790 | 15900 MPa |
Flexural modulus | | ISO 178 | 16000 MPa |
bending strength | | ASTM D790 | 89.6 MPa |
bending strength | | ISO 178 | 90.0 MPa |
compressive strength | | ASTM D695 | 186 MPa |
compressive strength | | ISO 604 | 184 MPa |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Impact strength of cantilever beam gap | | ISO 180/2A | 5.8 kJ/m² |
Impact strength of cantilever beam gap | | ASTM D256A | 59 J/m |
Electrical performance | Test Condition | Test Method | Test Result |
---|
dielectric strength | | ASTM D149 | 9.8 kV/mm |
dielectric strength | | IEC 60243-1 | 10 kV/mm |
Thermal performance | Test Condition | Test Method | Test Result |
---|
Heat distortion temperature | | ASTMD648 | 332 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.