PP TECHLEN ST910
0
- Usages:Automotive internal parts and applications in the automotive field
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 0.968 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 25 g/10min | |
| density | ASTM D792 | 0.968 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 25 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R-Scale | ASTM D785 | 75 |
| R-Scale | ASTM D785 | 75 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D256 | 150 J/m | |
| ASTM D256 | 59 J/m | ||
| ASTM D256 | 150 J/m | ||
| ASTM D256 | 59 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 22.1 MPa | |
| elongation | Break | ASTM D638 | 70 % |
| Flexural modulus | ASTM D790 | 1960 MPa | |
| bending strength | ASTM D790 | 36.3 MPa | |
| tensile strength | ASTM D638 | 22.1 MPa | |
| elongation | Break | ASTM D638 | 70 % |
| Flexural modulus | ASTM D790 | 1960 MPa | |
| bending strength | ASTM D790 | 36.3 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 125 °C | |
| ASTM D648 | 125 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top