ABS/PA NG-02 UV INEOS STYRO KOREA

Form：Granules | Grade：Injection grade

Properties:

UV resistancedimensional stability Filler: Glass fiber reinfFiller by weight

Typical Applications:

sporting goodsAutomotive sector

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	sporting goods \| Automotive sector
Properties:	UV resistance \| dimensional stability \| Filler: Glass fiber reinf \| Filler by weight

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179	35	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	ISO 179	25	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		ISO 178	80.0	Mpa
Bending modulus		ISO 178	2800	Mpa
Tensile strain	Yield,23°C	ISO 527-2	3.0	%
tensile strength	Yield,23°C	ISO 527-2	50.0	Mpa
Tensile modulus		ISO 527-2	3200	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD	ISO 11359-2	6E-05	cm/cm/°C
Vicat softening temperature	--	ISO 306/B50	108	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/A50	170	°C
Hot deformation temperature	1.8MPa,Annealed	ISO 75-2/A	80.0	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Annealed	ISO 75-2/B	105	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Melt Volume Flow Rate (MVR)	240°C/10.0kg	ISO 1133	30.0	cm3/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	1MHz	IEC 60250	0.013
Dielectric constant	100Hz	IEC 60250	3.40
Volume resistivity		IEC 60093	1E+15	ohms·cm
Surface resistivity		IEC 60093	1E+14	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test		ISO 2039-1	95.0	Mpa
film	Test Condition	Test Method	Test Result	Test Unit
elongation	Break	ISO 527-3	4.0	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top