POM 100T DUPONT USA

Form：Granules | Grade：Toughened grade

Properties:

High rigidityHigh hardnessThermal stabilityhigh viscosityheat-resisting

Typical Applications:

Thin walled productsFitness equipment

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Thin walled products \| Fitness equipment
Properties:	High rigidity \| High hardness \| Thermal stability \| high viscosity \| heat-resisting

Certificates

Technical Data Sheet

machinability	Test Condition	Test Method	Test Result	Test Unit
drying temperature			80	°C
Melting temperature			200-210	°C
drying time			2-4	hour
humidity			Max0.05	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	Annealed，1.8MPa	ISO -75-1	85	°C
Melting temperature		ISO -3146C	178	°C
Hot deformation temperature	0.46MPa	ISO -75-1	160	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa	ISO -75-1	80	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30℃	ISO -179/1eU	NB	NB
melt mass-flow rate	190℃,2160g	ISO -1133	2	g/10min
Bending modulus		ISO -178	1.8	GPa
Charpy Notched Impact Strength	-30℃	ISO -179/1eA	NB	NB
Water absorption rate		ISO -62	0.9	%
tensile strength		ISO -527-1	52	Mpa
elongation		ISO -75-1	75	%
Charpy Notched Impact Strength	有Notched	ISO -179/1eA	2.5	J/cm
Tensile modulus		ISO -527-1	1.9	GPa
elongation at yield		ISO -527-1	26	%
impact resistance		ISO -180/1A	20	KJ/m
elongation	nominal	ISO -527-1	50	%
density		ASTM D792/ISO 1183	1.37
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index	1mm	IEC 60112	PLC 0
Dielectric loss	1MHz	IEC 60250	0.009
Dielectric constant	1MHz,1mm	IEC 60250	3.1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top