MBS Zylar® Zylar 631
188
- Properties:High temperature resistanChemical resistanceAging resistancethermal stability
- Usages:Sports equipmentFitness equipmentCastersHome appliance componentsElectronic and electrical productsToy
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Density | ISO 1183 | 1.05 g/cm³ | |
| Melt volume flow rate | 5.8 cm3/10min | ||
| Water absorption rate | ISO 62 | 0.1 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam gap | ISO 179 | 3.4 kJ/m² | |
| Falling hammer impact | ASTM D5420 | 11 J |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO 2039-2 | 70 | ||
| Tensile modulus | ISO 527-2 | 2120 Mpa | |
| Tensile strength | ISO 527-2 | 39 Mpa | |
| Tensile strain | ISO 527-2 | 36 % | |
| Bending modulus | ISO 178 | 1890 Mpa | |
| Bending strength | ISO 178 | 57 Mpa |
| Optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| transmittance | ASTM D1003 | 89 % | |
| Haze ratio | ISO 14782 | 1.5 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Linear coefficient of thermal expansion | ISO 11359 | 0.8-1.1 ×10-4/℃ | |
| Thermal conductivity coefficient | DIN 5261-1 | 0.17 W/m/K | |
| Hot deformation temperature | ISO 75-2/B | 101 °C | |
| ISO 75-2/A | 87 °C | ||
| ISO 306 | 74 °C | ||
| Maximum operating temperature | 250 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top