Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D1238 | 8.0 g/10 min |
| Water absorption rate | | | < 0.10 % |
| Water absorption rate | | | < 0.10 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 41.7 Mpa |
| tensile strength | | ASTM D638 | 41.7 Mpa |
| elongation | | ASTM D638 | 2.0 % |
| bending strength | | ASTM D790 | 73.5 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| | ASTM D256 | 15 J/m |
| squeeze out | Test Condition | Test Method | Test Result |
|---|
| Melt Temperature | | | < 260 °C |
| injection | Test Condition | Test Method | Test Result |
|---|
| Processing (melt) temperature | | | < 260 °C |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Thermal deformation temperature under load | | ASTM D648 | 85.0 °C |
| vicat | | ASTM D1525 | 98.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare