TEEE RTP 1501-55D
0
- Properties:Fillerglass fiber reinforced material10%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.26 g/cm³ | |
| Shrinkage rate | ASTMD955 | 0.26到0.42 % | |
| water content | <0.10 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD2240 | 61 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Primary Additive | 10 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 370 J/m | |
| Suspended wall beam without notch impact strength | ASTMD4812 | 960 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTMD638 | 1100 MPa | |
| tensile strength | ASTMD638 | 32.4 MPa | |
| elongation | Yield | ASTMD638 | >10 % |
| Flexural modulus | ASTMD790 | 827 MPa | |
| bending strength | ASTMD790 | 31.0 MPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top