LDPE PAXOTHENE® NA248A USI TAIWAN
31
- Properties:Injection molding level
- Usages:film
Compare
View PricesTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-1505 | 0.916 g/cm | |
| melt mass-flow rate | ASTM D-1238 | 46 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ductility | ASTM D-638 | 100 % | |
| Tensile strength at fracture point | ASTM D-638 | 75 kg/cm | |
| Tensile strength at the point of surrender | ASTM D-638 | 85 kg/cm |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Low temperature brittleness | ASTM D-746 | -37 ℃/F50 | |
| Shore hardness | ASTM D-2240 | 43 D | |
| Melting point | ASTM D-2117 | 99 °C |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D-1525 | 79 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top