PA66 A3X2G10 BASF GERMANY

Form：Granules | Grade：Injection grade

Properties:

High mobilityheat-resisting

Typical Applications:

Laptop case

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Laptop case
Properties:	High mobility \| heat-resisting

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23℃	kJ/m²	11.143to19.964
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ASTM D638/ISO 527	16000/12000	kg/cm²(MPa)[Lb/in²]
tensile strength	Break,23℃		144.83to292.41	MPa
Tensile modulus	23℃		8206.9to28000.0	MPa
Tensile strain	Break,23℃	%	1.9to3.1
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Combustibility (rate)		UL 94	V-2
Continuous use temperature		°C	110to220
8.0Mpa, unannealed		°C	65to220
1.8MPa, unannealed		°C	230to250
transverse		mm/mm/°C	68.6E-5-127.0E-5
flow		mm/mm/°C	142.2E-5-203.2E-5
Melting temperature		°C	260
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792/ISO 1183	1.6
Water absorption rate		ASTM D570/ISO 62	0.7-1.1	%
Saturation, 23 ℃		%	3.5to5.0
Balance, 23 ℃, 50% RH		%	1.2to1.5
Shrinkage rate	23℃	%	0.10-0.31
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength	23℃	V/mil	840
Volume resistivity	23℃	ohms·cm	1.0E+12-1.0E+14
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test			222.76to370.34	MPa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top