PA66 66 H2 G/25 V0 CT1 LATI ITALY

Form：Granules | Grade：Injection grade

Properties:

Filler: Glass fiber reinf25%Filler by weight

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Properties:

Filler: Glass fiber reinf | 25% | Filler by weight

Certificates

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	35	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.75mm	UL 94	V-0
	UL flame retardant rating	1.5mm	UL 94	V-0
	UL flame retardant rating	UL flame retardant rating	3.0mm	UL 94	V-0
Burning wire flammability index	1.0mm	IEC 60695-2-12	960	°C
Burning wire flammability index	Burning wire flammability index	2.0mm	IEC 60695-2-12	960	°C
Hot filament ignition temperature	1.0mm	IEC 60695-2-13	900	°C
Hot filament ignition temperature	Hot filament ignition temperature	2.0mm	IEC 60695-2-13	900	°C
Extreme Oxygen Index		ASTM D2863	35	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield,120°C	ISO 527-2/5	60.0	Mpa
	tensile strength	Yield,150°C	ISO 527-2/5	50.0	Mpa
		tensile strength	Break,23°C	ISO 527-2/5	135	Mpa
			tensile strength	Break,60°C	ISO 527-2/5	95.0	Mpa
				tensile strength	Break,90°C	ISO 527-2/5	75.0	Mpa
					tensile strength	Break,120°C	ISO 527-2/5	60.0	Mpa
					tensile strength	tensile strength	Break,150°C	ISO 527-2/5	50.0	Mpa
Tensile strain	Yield,120°C	ISO 527-2/5	3.5	%
	Tensile strain	Yield,150°C	ISO 527-2/5	3.7	%
		Tensile strain	Break,23°C	ISO 527-2/5	2.1	%
			Tensile strain	Break,60°C	ISO 527-2/5	2.4	%
				Tensile strain	Break,90°C	ISO 527-2/5	3.8	%
					Tensile strain	Break,120°C	ISO 527-2/5	3.9	%
					Tensile strain	Tensile strain	Break,150°C	ISO 527-2/5	4.2	%
Tensile modulus	23°C	ISO 527-2/1	9200	Mpa
	Tensile modulus	60°C	ISO 527-2/1	7200	Mpa
		Tensile modulus	150°C	ISO 527-2/1	2200	Mpa
			Tensile modulus	120°C	ISO 527-2/1	3200	Mpa
			Tensile modulus	Tensile modulus	90°C	ISO 527-2/1	4800	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD：30to100°C	ISO 11359-2	8E-06	cm/cm/°C
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	255	°C
	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	240	°C
	Hot deformation temperature	Hot deformation temperature	连续使用温度4		115	°C
Vicat softening temperature		ISO 306/B50	245	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	TD:2.00mm	ISO 294-4	0.70-1.0	%
Shrinkage rate	Shrinkage rate	MD:2.00mm	ISO 294-4	0.35-0.60	%
Water absorption rate	23°C,24hr	ISO 62	0.25	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index	SolutionA	IEC 60112	PLC 1
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
dimensional stability			21.0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top