
POM FG2025 MITSUBISHI THAILAND
131
Form:Granules
Properties:
FG2025Aging resistanceHigh temperature resistanHigh impact resistanceGlass fiber reinforced gr
Typical Applications:
household electrical appliancesElectrical applicationsAutomotive ApplicationsProfile
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | household electrical appliances | Electrical applications | Automotive Applications | Profile |
| Properties: | FG2025 | Aging resistance | High temperature resistan | High impact resistance | Glass fiber reinforced gr |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Rockwell hardness | ASTM D785 | 95 | M | |
| Impact strength of cantilever beam gap | 3.2mm | ASTM D256 | 83 | J/m |
| Bending modulus | 23℃ | ASTM D790 | 9.12 | GPa |
| bending strength | 23℃ | ASTM D790 | 206 | Mpa |
| Stretching length | 23℃ | ASTM D638 | 3 | % |
| tensile strength | 23℃ | ASTM D638 | 137 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL 94 | HB | ||
| Hot deformation temperature | 820Kpa | ASTM D648 | 163 | °C |
| 455Kpa | ASTM D648 | 164 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | Flow | 0.6 | % | |
| Water absorption rate | ASTM D570 | 0.20 | % | |
| Filling content | 25 | % | ||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric constant | 106Hz | ASTM D150 | 33 | Pf/m |
| Dielectric strength | ASTM D149 | 23 | MV/m | |
| Volume resistivity | ASTM D257 | 1×1014 | ||
| Surface resistivity | ASTM D257 | 1×1016 | ||
| Dielectric loss | 106Hz,Tangent | ASTM D150 | -- |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.