ABS KMI 223L KMI Group, Inc.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	--	ISO 180/1A	136.0	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	--	ISO 180/4A	1001707050	J/m
Impact strength of simply supported beam without notch		DIN 53453	无断裂
Charpy Notched Impact Strength		DIN 53453	10	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	TestedbyKMI	UL 94	HB
Hot filament ignition temperature		IEC 60695-2-13	650	°C
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ASTM D638	45.0	MPa
elongation	Break	ASTM D638	20	%
Bending modulus		ASTM D790	2350	MPa
bending strength		ASTM D790	69.0	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
thermal conductivity		ASTMC177	0.40to0.60	W/m/K
Linear coefficient of thermal expansion	MD	ASTM D696	1.7E-06	cm/cm/°C
Vicat softening temperature		ISO 306/A120	96.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.04	g/cm³
melt mass-flow rate		ISO 1133	26	g/10min
Water absorption rate	Equilibrium	ASTM D570	0.30	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant		IEC 60250	3.10
Dissipation factor		IEC 60250	0.015
Dielectric strength		IEC 60243-1	30	kV/mm
Volume resistivity		IEC 60093	1E+15	ohms·cm
Surface resistivity		IEC 60093	1E+14	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Sale	ISO 2039-2	109

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top