PP Alloy Stat-Rite® S250 Lubrizol Advanced Materials, Inc.
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 0.980 g/cm³ |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Ions | 内部方法 | 7.00 ng/cm² | |
| 内部方法 | 5.00 ng/cm² | ||
| 内部方法 | 16.0 ng/cm² | ||
| 内部方法 | 53.00 ng/cm² | ||
| Analysis of evolved gases | 内部方法 | 1.00 µg/g | |
| 内部方法 | <0.100 µg/g | ||
| 内部方法 | 7.00 µg/g | ||
| Ions | 内部方法 | <10.0 ng/cm² | |
| nonvolatile content | 内部方法 | 1.30 µg/cm² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation at break | ASTM D638 | 200 % | |
| Tensile modulus | ASTM D638 | 1280 MPa | |
| Flexural modulus | ASTM D790 | 1280 MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 110 J/m | |
| tensile strength | ASTM D638 | 28.0 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 3E+10 Ω.cm | |
| Surface Resistivity | ASTM D257 | 8E+09 Ω.cm | |
| static decay | <1.0 sec | ||
| Surface Resistivity | ESDS11.11 | 8E+08 ohms | |
| coefficient of friction | 内部方法 | 10.0 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 73.0 °C | |
| ASTM D648 | 50.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top