
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23℃ | kJ/m² | 2.647to20.893 | |
| Suspended wall beam without notch impact strength | 23℃ | J/m | 0.222to0.332 | |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| Hot filament ignition temperature | °C | 798to904 | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Fracture, 23 ℃ | 151.72to280.69 | MPa | ||
| % | 1.6to2.1 | |||
| Yield, 23 ℃ | % | 2.0to3.0 | ||
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| flow | mm/mm/°C | 137.2E-5-25.4E-5 | ||
| 1.8MPa, unannealed | °C | 223to230 | ||
| 0.45MPa, unannealed | °C | 234to255 | ||
| transverse | mm/mm/°C | 55.9E-5-50.8E-5 | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Melt Volume Flow Rate (MVR) | 275°C/2.16kg | ISO 527-2/5 | 0.01to0.04 | |
| Flow: 23 ℃ | Flow,23℃ | mm/mm | 38.1E-3-78.7E-3 | |
| melt mass-flow rate | 275°C/2.16kg | g/10min | 3.6to20 | |
| Saturation, 23 ℃ | % | 0.060to0.15 | ||
| 23℃,24hr | % | 0.16to0.30 | ||
| Balance, 23 ℃, 50% RH | % | 0.70to1.5 | ||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | 23℃ | ohms·cm | 3.0E+2-2.1E+16 | |
| Surface resistivity | ohms | 5.0E+3-6.0E+15 | ||
| Dielectric strength | 23℃ | V/mil | 500to840 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.