Technical Data Sheet
| other | Test Condition | Test Method | Test Result |
|---|
| colour | | | 本色、黑色 |
| processability | Test Condition | Test Method | Test Result |
|---|
| Dry conditions | | | 95℃，4-6小时 |
| process temperature | | | 260 °C |
| process temperature | | | 280 °C |
| process temperature | | | 270 °C |
| process temperature | | | 290 °C |
| Temperature | | | 85 °C |
| pressure | | | 90-120 Mpa |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Charpy impact strength | | ASTM D256/ISO 179 | 12 kg·cm/cm(J/M)ft·lb/in |
| Charpy impact strength | | ASTM D256/ISO 179 | 60 kg·cm/cm(J/M)ft·lb/in |
| elongation at break | | ASTM D638/ISO 527 | 2.5 % |
| tensile strength | | ASTM D638/ISO 527 | 150 kg/cm²(MPa)[Lb/in²] |
| Flexural modulus | | ASTM D790/ISO 178 | 8500 kg·cm/cm(J/M)ft·lb/in |
| bending strength | | ASTM D790/ISO 178 | 240 kg·cm/cm(J/M)ft·lb/in |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | ASTM D150/IEC 60250 | 3.4 |
| Volume resistivity | | ASTM D257/IEC 60093 | 1*10^14 Ω.cm |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.62 |
| Mold Shrinkage | | ASTM D955 | 0.4-0.7 % |
| Water absorption rate | | ASTM D570/ISO 62 | 0.82 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat Deflection Temperature | | ASTM D648/ISO 75 | 240 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices