Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.59 g/cm³ |
| Shrinkage rate | | ASTM D995 | 0.30 % |
| Shrinkage rate | | ASTM D995 | 0.90 % |
| Water absorption rate | | ASTM D570 | 0.050 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 95 M（Scale） |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 152 MPa |
| elongation at break | | ASTM D638 | 2.2 % |
| bending strength | | ASTM D790 | 220 MPa |
| Flexural modulus | | ASTM D790 | 10000 MPa |
| Impact strength of cantilever beam gap | | ASTM D256 | 80.0 J/m |
| Flame retardant performance | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL -94 | HB - |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTM D149 | 25.0 KV/mm |
| Dissipation Factor | | ASTM D495 | 130 s |
| Volume resistivity | | ASTM D257 | 1E+16 Ω.cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Linear coefficient of thermal expansion | | ASTM D696 | 3E-05 cm/cm／°C |
| Linear coefficient of thermal expansion | | | 255 °C |
| Linear coefficient of thermal expansion | | ASTMUL746B | 130 °C |
| Heat distortion temperature | | ASTM D648 | 245 °C |
| Heat distortion temperature | | ASTM D648 | 225 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare